Paired with the DeWalt Gold Ferrous 14 PC. PILOT POINT® Drill Bit Set which, for a limited time comes FREE with the purchase of the DeWalt DCF885C2 20-Volt Brushless Compact Impact Driver Kit, you will be able to handle a variety of projects using tools that withstand daily jobsite wear and tear. Innovative features make it ideal for cabinetmakers, HVAC professionals, steel stud framers, and contractors who frequently perform drilling and fastening applications overhead or in tight spaces.
Although, it is lightweight enough to carry on your tool belt and forget about it, don’t be fooled, this small and lightweight tool still packs a punch to get the job done. Its durable motor delivers 2,800 RPM—up to 43 percent faster than other impact drivers. Due to the driver’s impact mechanism built inside, its smaller size and lack of kickback, this tool does not compromise on power and is growing in popularity.
Electronics have been built into the impact driver’s switch to provide maximum life for the tools and batteries by helping to protect them from overheating, overloading, and deep discharge during use. The 20-volt’s lithium-ion batteries provide up to 35 percent more run-time than existing 18-volt lithium-ion battery technology. The included charger has dual voltage capabilities, and it is compatible with both 12-volt max and 20-volt max DEWALT lithium-ion batteries. The battery charges faster than that of other models, charging in minutes, not hours.
The bright built-in LED work light above the trigger has a 20-second delay that improves visibility in dimly lit spaces. Along with its compact and ergonomic design even in hard-to-reach places, it provides light without shadows.
The impact driver is a one-handed loading 1/4-inch hex chuck that accepts and holds 1-inch bit tips for convenient fastening in tight spaces. It’s all-metal belt hook can be attached to either side of the tool, and the slim handle fits easily into users’ hands, increasing the level of comfort during the course of long jobs. Making it easier to chuck the bit, when using steel drivers all you have to do is insert the bit into the chuck – no need to pull out the collar, except when using zinc hex bits.
This tool is not only for seasoned professionals, but the casual DIY’er as it is easy to grip, load, and charge, making it both powerful and versatile for most any job.
Other Features & Benefits Include:
- 3,200 impacts per minute and 1,400 inch-pounds of max torque
- One-handed loading 1/4-inch hex chuck accepts 1-inch bit tips
- Cordless 20V Max, Compact 5.55 in, 2.8 lbs.
- (2) Lithium-ion battery packs
- Belt Hook for portability
- Contractor Bag